Best Brownells Deals Today & Working Special Deals

Built out of stainless steel Lightweight effective design 3 Port Self-timing brake Easy to mount Weight: 2.1 Oz Baffles designed to keep muzzle jump down 6.5 mm caliber Good for any caliber up to and including 6.5 mm Mfg: Meraki Machine

Easy to install drop-in design. Fits the Glock 19, 19X, and Model 45 (9mm) pistols in Gen 1-5 Advanced proprietary broach cut design specifically engineered for increased accuracy potential. Broach cut 6 groove rifling allows for all ammo types to be used safely, including cast lead. 100% Designed and manufactured in the USA with USA sourced certified 416R stainless steel. 9mm 1/10RH twist rifling. Special 11 degree competition style target crown for non-threaded versions or 1/2x28 threads with included thread protector on threaded versions. Threaded versions include Viton high heat integral O-ring lock thread protector. Fully supported Mfg: True Precision, Inc.

SNAGMAG for S&W M&P Full 9/40, P250/320 17 rd RH Mfg: 1791 Gunleather

Long lasting phosphor bronze resists corrosion. Looped and wound shanks. Mfg: Brownells SPECS: 8-32 or 5/16"-27 thread.

The Strike Iron Sights (Suppressor Height) give you an elevated sight picture for a red dot or suppressor pistol setup. The front and rear sights sit at an absolute co-witness position with a slide mounted red dot. Designed to help with proper sight alignment and keep the shooter's eyes focused, there is natural light that is seen on both sides of the front sight between the u-notch rear sight. Steps placed in the rear of both sights help angle and reduce unwanted glares or reflections out of your eyes. Lines and angles designed to use natural light reflections and shadow play to keep user's eye aligned and focused on the target. The rear sight is designed with a negative angle so Mfg: Strike Industries

Built out of stainless steel Lightweight effective design 3 Port Self-timing Brake Easy to mount Weight: 1.7 Oz Baffles designed to keep muzzle jump down .223 caliber Good for any caliber up to and including .223 Mfg: Meraki Machine

Going back to the basics with the Norma Whitetail Line. When hunting season starts, you want to be able to count on your ammunition. Norma's Whitetail line of ammunition is loaded with the highest quality brass that meets and exceeds the standard set forth by reloaders. Norma's proven soft-point bullet, matched with their premium brass case allows for confidence in consitent shot performance. Norma Whitetail is designed to deliver the shot to shot performance you need to ensure your next hunt is always successful. SOFT POINT Norma's Soft Point is a popular Classic among deer hunters all over the world. It features a flat-based bullet which offers consistent accuracy ev Mfg: Norma

SNAGMAG for LCP, P238, P3AT, Pocketlite, DB380 RH Mfg: 1791 Gunleather

CNC machined with tight tolerances to ensure consistent sear engagement and smooth, straight firing pin travel. The lightweight aluminum bolt shroud has close-tolerance bottom flats (.010" larger in areas) to minimize bolt side play. Gives consistent, cocking piece/sear height for repeatable engagement/release with all factory and aftermarket triggers. Firing pin is Flute Steel fully polished with a radius on tip to avoid breakage. Firng pin spring has reduced OD and ID to minimize unnecessary bending and drag. Assembly includes shroud, firing pin, cocking piece and firing pin spring. If you are purchasing a GTR Firing Pin Assembly for a PTG bolt it needs to be fit Mfg: Gre-Tan SPECS: 7075 - T6 Aluminum shroud, Matte Black (Blk) anodized or Silver (Sil) Norguard Nickel Plated finish. 4140 steel fluted firing pin; LA wt. 3.19 oz (90.4 gm), SA wt. 2.95 oz. (83.6 gm). Tool steel cocking piece, heat treated and hardened. Fits Remington 700 standard and ISS Lo

The Strike Industries M-LOK Cable Management Covers add a positive tactile feeling but also utilizes the patent pending SI Cable Management System (CMS) function enables you to organize and store excess wire from your weapon light or any other cabled accessories. Instead of tucking wire anywhere you can and using cable ties or tape to hold it down, the SI CMS will offer you a place to route and/or contain loose wire inside the cover cavity. Cables can be routed alongside the handguard, across to the other side, 90-degrees or U-shape. The directions and possibilities are almost endless. Designed to be low-profile (6.20mm (0.24") height) and used in any orientation, the contoured Mfg: Strike Industries

Springfield Armory SA-35 gives today's shooters a modern take on a revered classic. Featuring subtle but significant upgrades to John Moses Browning's original P-35 design, the 9mm SA-35 captures the appeal of the "wood and steel" era of arms making while offering the upgraded enhancements of today's defensive pistols. Made in the U.S.A., the SA-35 features rugged forged steel parts for strength and durability, improved ergonomics and enhanced controls, a factory tuned trigger, modern sights, an improved feed ramp design, and an increased 15-round capacity. Rated For +P Ammunition Mfg: Springfield Armory

Eighteen incredibly thin bits to fit the extra-narrow screw slots often encountered in the gun shop. Take great care when using these bits. The blade MUST fill the slot from side-to-side and edge-to-edge or it will most certainly break on a firmly seated screw. Freeze spray, heat, penetrating oil, a few taps, regrinding the bit for an even better fit - all these tricks can help give success. Mfg: Brownells SPECS: 1½" (3.8cm) long bits

The ELF AR-9 Trigger has been built for performance. This trigger has an adjustable pull weight between 2.75 lbs and 4 lbs. Secifically developed for 9mm and .45 PCC platforms, after tens of thousands of rounds of testing in all platforms, the boss has decided this is the best trigger we have ever produced and does it all in every AR platform. It has a u-shaped captured disconnector that forces a positive hold on the hammer and also has a ""pad"" that matches up to an extension on the hammer. The pad is directly in line with the rear trigger pin so when the hammer is stopped by those matching surfaces it effectively eliminates trigger slap from the hammer hitting Mfg: Elftmann

Introducing the ALL NEW PIG FDT Delta+ Glove! Bridging the gap between the popular PIG FDT Delta Gloves and the PIG FDT Delta FR Glove, the PIG FDT Delta+ combines the affordability of the Delta with the all-leather palm of the Delta FR model. Like the standard PIG FDT Delta Gloves, the Delta+ model utilizes a simple minimalist design that is unsurpassed in dexterity. Patrol has worked closely with a special tannery that offers Touchscreen Compatible leather for the trigger finger and thumb. While the premium goatskin leather will have a slightly different feel from the synthetic suede on the Delta glove, the leather palms and fingers will break in extremely well over time and provide Mfg: Patrol Incident Gear

Spring-loaded tool gives constant, straight-back pressure to keep bolt lugs square against the receiver while lapping with 600 to 800 grit, silicon carbide abrasive. Provides better results than mere thumb pressure. Interchangeable threaded sleeves fit popular actions listed below. Mfg: Brownells SPECS: 3¾" (9.5cm) long, ¾ lb. (340 g). M14/M1A Set sleeve includes large diameter plunger and special lapping handle required for these models. Mauser Large sleeve fits large ring Mauser actions. Mauser Small fits small ring Mauser actions. Savage Small sleeve fits Savage acti

If you or your customer has one of those guns that drives tacks or knocks down birds every time, the slight extra cost of our Special Line brushes is well worth it to eliminate any chance of the cleaning brushX'Xs shank putting a scratch in that all-important barrel. The Brass shank is one-piece, looped and wound, (not two, twisted together and chopped off). The coupling is no-scratch Brass. The bristles are the best, phosphor, bronze scrubbing wire for long life and thorough cleaning. Mfg: Brownells SPECS: Bristles: Phosphor bronze. Shank: Brass, looped and wound. Rifle: 3¼" (8.3cm) OAL except .17 cal., which is 2" (5.1cm) OAL, .17 and .20 cal. 5-40 threads, all other 8-32 thread. Pistol/Revolver: 2-1/8" (5.4cm) OAL, .17 cal. 5-40 thread, all others 8-32 thread. Shotgun: 2-7/8" (7.3cm) OAL, 5/1

Side Armor Bag Caps The Spiritus Systems Side Armor Bag Caps Caps revolutionize the way users carry side armor. No longer does the end user need to have separate bags MOLLE'd onto their cummerbund to carry hard plates and soft armor at the same time. Combining both hard plate and soft armor bags into one item, we save material and space. This reduces the load on the user and helps in reducing bulk and heat. Simply add a cap to our LV Side Armor Bags and you're good to go. Sold as a set of two Armor Bag Caps. Make sure your soft armor insert matches up with the appropriate Side Armor Bag Cap Size: Small Bag Cap Will Fit: 5"x7" Soft Armo Mfg: Spiritus Systems

Machined, steel, barrel bushings provide a tight, slide to barrel fit; available in both Government and Commander. Heat treated and hardened for outstanding durability. Drop-In - Close, drop-in fit on Colt slides. Requires no fitting with Ed Brown Barrel and Colt slides. Other brands may require minor fitting. Oversize - Requires turning of O.D., and reaming of I.D., to achieve a true match fit. Commander available in Drop-In, Stainless Steel only. Mfg: Ed Brown SPECS: Steel, blue or stainless steel (SS), silver, matte finish. Drop-In (DI) - .581" (14.8mm) I.D., .699" (17.7mm) O.D. Oversize (OS) - .575" (14.6mm) I.D., .705" (17.9mm) O.D. Commander available in Drop-In, (SS) only.

The ELF Match Trigger has been built for law enforcement and military duty. This trigger has a pull weight range from 2.75 lbs to 4lbs and is the only AR-15 trigger using aerospace grade sealed bearings, making for an incredibly smooth and fast trigger pull. Elftmann's exclusive .043 double double wound polished piano wire hammer spring ensures full ignition of any ammo including .308 and 7.62x39. Pull weight from 2 3/4 to 4lbs is so easy to adjust it can be done in seconds without removing the trigger from your lower receiver. A second-to-none AR-15 drop-in trigger system that is strong and light, made of wire EDM machined, hardened A2 tool steel and lightweight aircraft-grad Mfg: Elftmann

Introducing the ALL NEW PIG FDT Delta+ Glove! Bridging the gap between the popular PIG FDT Delta Gloves and the PIG FDT Delta FR Glove, the PIG FDT Delta+ combines the affordability of the Delta with the all-leather palm of the Delta FR model. Like the standard PIG FDT Delta Gloves, the Delta+ model utilizes a simple minimalist design that is unsurpassed in dexterity. Patrol has worked closely with a special tannery that offers Touchscreen Compatible leather for the trigger finger and thumb. While the premium goatskin leather will have a slightly different feel from the synthetic suede on the Delta glove, the leather palms and fingers will break in extremely well over time and provide Mfg: Patrol Incident Gear

Short shank, compact, clip-tip handle MAGNA-TIP with three custom bits for S&W Strain, Windage, Side Plate and Sight attaching screws. Gives excellent control. Mfg: Brownells SPECS: 5-1/2" (14.0cm) overall. 3-3/4" (9.5cm) x 1" (2.5cm) diameter.

Side Armor Bags The Spiritus Systems Side Armor Bags are modular in design and allow for the use of hard armor plates, soft armor inserts (with the addition of one of Spiritus Side Armor Bag Caps), or both hard and soft armor at the same time. The bags were built with an offset MOLLE configuration, which allows the user to wear the plates as far forward on the cummerbund as possible. Wearing your side armor as far forward allows for side plate to front plate contact and closes a small gap in protection left over by traditional side armor systems currently on the market. Side Armor Bags are compatible with MOLLE cummerbunds and will not work with elastic cummerbunds. Plate F Mfg: Spiritus Systems

Mfg: Sig Sauer, Inc.

Zippered Rifle Compartment W/ Adjustable Velcro Ties Zippered Accessory & Extra Magazine Compartment Padded Shoulder Strap MDLLE Compatible 13″ H X 38″ W X 3″D" Mfg: Bulldog Cases

Additional length engages and flips fired cases clear of the slide to help prevent jams and "smokestacking". Replaces the standard ejector with no modifications to frame. Machined from hardened steel to resist wear. Installation may require minor fitting. Mfg: Ed Brown SPECS: Hardened steel, blued. Fits 1911 Auto.

The Strike Industries T-Bone Charging Handle for .223/5.56 AR-15's feature a patented gas redirect system that allows you to configure the gas to exit only left, only right or evenly to both sides. The shaft of the charging handle is machined from 7000 series aluminum which excels in applications requiring lightweight and high strength. However, with comfort and control in mind, the T-Bone latchless handles are made from SI PolyFlex polymer. The handles can be easily swapped with optional (coming soon) different sizes and styles. The latchless feature of the T-Bone gives minimal wear and tear on your AR upper receiver compared to traditional charging handles on the market. The Strike Mfg: Strike Industries

Solid oak block holds up to 75 Magna-Tip bits and drops right into any Magna-Tip Box. Also makes a great bench block! Mfg: Brownells SPECS: Oak, natural color, clear sealer. 8-1⁄4" (21cm) x 3-3⁄4" (9.5cm) x 11⁄16" (17mm).

Introducing the ALL NEW PIG FDT Delta+ Glove! Bridging the gap between the popular PIG FDT Delta Gloves and the PIG FDT Delta FR Glove, the PIG FDT Delta+ combines the affordability of the Delta with the all-leather palm of the Delta FR model. Like the standard PIG FDT Delta Gloves, the Delta+ model utilizes a simple minimalist design that is unsurpassed in dexterity. Patrol has worked closely with a special tannery that offers Touchscreen Compatible leather for the trigger finger and thumb. While the premium goatskin leather will have a slightly different feel from the synthetic suede on the Delta glove, the leather palms and fingers will break in extremely well over time and provide Mfg: Patrol Incident Gear

#81 Handle - Rugged, and hand filling with a powerful magnet for fast bit changes. Plus, the magnetism transfers through the bit, to hold the screw against the bit. The handle is made from a tough, nearly unbreakable plastic, while the steel, hex shank accepts a small wrench for added leverage. #84 Hollow Handle- Make a custom screwdriver kit to fit each gun. Magnetic shank with hollow handle accepts four bits, screw-on cap keeps them in place. Law Enforcement Handle - Originally requested by police armorers who wanted their hand close to the work but with a longer handle than our stubby. About 20% shorter and smaller diameter than our #81 Handle. Magnetic version for fast bit changes. Cl Mfg: Brownells SPECS: #81 Handle - 1¼" (3.2cm) diameter, 8" (20.3cm) long overall. Handle With Bit includes your choice of bit from #445-1 through #445-4. #84 Hollow Handle - 1¼" (3.2cm) diameter, 8" (20.3cm) long overall. Handle With Bits includes #445-1, #445-2, #445-3 and #4

The Cutting Edge Bullets 22LR die set includes seating die, crimping die, and 2 shell holders. Perfect for use with the new CuRx 22LR bullets and cure Projectile Dysfunction for good! This 22LR die set includes seating die, crimping die, and 2 shell holders. Mfg: Cutting Edge Bullets

Bulldog Extreme Scoped Rifle Case Case Shape Accommodates Scoped & Non-Scoped Rifles Removable, Adjustable Shoulder Strap w/ All Metal Swivels 2 1⁄4" Total Extra Thick Soft, Close Cell Padding Full Length Zipper w/ Pull Durable, Heavy-Duty Nylon Water-Resistant Outer Shell Zippered Accessory Pocket Soft, Fur Inner Lining For Maximum Protection Heavy-Duty Double Stitching Mfg: Bulldog Cases

Additional length engages and flips fired cases clear of the slide to help prevent jams and "smokestacking". Replaces the standard ejector with no modifications to frame. Machined from hardened steel to resist wear. Installation may require minor fitting. Mfg: Ed Brown SPECS: Hardened steel, blued. Fits 1911 Auto.

Built for hard use, high impact and supreme weather resistance, new Vault series equipment cases are the most rugged and secure in their class. Equipped with a host of premium protective features at a price more travelers can afford, as only the 42-year veteran of hard knocks could deliver. Mfg: Pelican

The finest phosphor bronze bristles on a looped and wound shank; in sizes to correctly fit the chambers of most popular rifle and handgun rounds on the market. Mfg: Brownells SPECS: 8-32 thread.

Glock 23 The GLOCK 23 combines compact dimensions for both open and concealed carry, with minimum weight, despite its substantial magazine capacity in 40 S&W caliber. Having survived endurance tests and use by numerous Law Enforcement agencies, the G23 pistol has repeatedly demonstrated its world-class durability and reliability in the most adverse conditions. Mfg: Glock

The funnel kit is used to pour the powder from the pan of the scale kit into the brass when reloading. Includes two funnels and five sized tubes. Mfg: Mec Reloading

With this Socket Head Screw Kit you will have on hand the most popular and most wanted Socket Head screws - ideal when setting a screw down really tight is important - at a really economical price. Lets you fit Socket Head Screws to the widest possible variety of bases, rings, sights and ribs because we've matched the correct head to the required thread size and length for you. Saves you time, hassle and inventory! You get a full selection - 168 Socket Head Screws: 1 dozen each of 14 different screws includes 8 Fillister Head and 6 Weaver Oval Head styles in 4 lengths and 3 thread sizes (6-40, 6-48 and 8-40). Then, when custom fitting is required, or you need to shorten Mfg: Brownells SPECS: Made for us in U.S. to same head/shape specs as the Slotted Sight Base Screws. 3/32" socket. Blued. Kit includes: 168 screws, compartmented Kit Box, Tweezers, Checker/Shortener Jig and Chart showing bases/rings/ribs/etc., that the screws fit. Refills sold 12 per Pak. 3/8" (9.5mm), &fr

Glock 20 SF (Short Frame) The GLOCK 20 SF combines the SF (Short Frame) design with the powerful 10 mm Auto AUTO cartridge making the frame more comfortable and significantly enhancing controllability and accuracy. The SF design reduces the circumference of the receiver at the rear offering increased ease-of-use and control, especially to shooters with smaller hands. The GLOCK 20 SF dimensions also provide a long sight radius for better precision. Mfg: Glock

B.E.S.T. (Benelli Surface Treatment) is a new proprietary finishing technology developed by engineers and scientists at Benelli's manufacturing headquarters in Urbino Italy. This coating protects steel with a tough, impenetrable armor that stops rust and corrosion. Mfg: Benelli

Standard Bradley - Places the front sight bead on a block of steel for positive indexing, greater surface area and increased strength. Available in red and white colored plastic or gold brass beads. Metric Bradley - Beads are all white in color. Solid Brass Bradley - Uniform yellow brass (gold) or white brass (silver) beads with or without positive-stop skirts. Mfg: Bradley Gunsight SPECS: Standard Base - steel, blue. Bead - Plastic, red or white. Brass Beads - gold or silver.

Easily and professionally solves the problem of stripped out stock bushing holes. Special tap cleans out stripped frame threads, cuts new ones without pre-drilling. Matching bushing screws right in, uses original grip screw. Will save your life when polishing/bluing, accurizing .45's! Mfg: Brownells SPECS: Bushings - .255"-60, blued steel. Tap - High speed.

Copper Impact ammunition combines extensive experience into a product engineered specifically for hunters. The Extreme Point, copper-solid bullet features an oversized impact diameter. The larger impact diameter means more impact trauma, better energy transfer and larger wound cavities for faster knockdown. The solid-copper bullet design offers improved weight retention for deeper penetration and a red, reinforced polymer tip. Additional features of this bullet include a streamlined ballistic profile and boattail for flat trajectory, a hollow nose cavity for lethal, terminal performance and a solid-copper construction for maximum retained weight and energy transfer. Mfg: Winchester

The ETHOS SuperSport combines the excellence of our popular ETHOS Sport model with a new, lightweight, weather-resistant carbon-fiber finish for unmatched performance in any weather. The synthetic stock accommodates our Comfort Tech 3 recoil-reduction system that teams with a ported barrel to mitigate recoil and muzzle jump. A fiber-optic front sight with a red insert, combines with a mid-rib bead inside a sight channel atop the wide rib to offer instinctive aiming. A beveled loading port speeds reloading. Five extended choke tubes are included to facilitate quick changes in the heat of competition. Mfg: Benelli U.S.A.

Standard Bradley - Places the front sight bead on a block of steel for positive indexing, greater surface area and increased strength. Available in red and white colored plastic or gold brass beads. Metric Bradley - Beads are all white in color. Solid Brass Bradley - Uniform yellow brass (gold) or white brass (silver) beads with or without positive-stop skirts. Mfg: Bradley Gunsight SPECS: Standard Base - steel, blue. Bead - Plastic, red or white. Brass Beads - gold or silver.

Copper Impact ammunition combines extensive experience into a product engineered specifically for hunters. The Extreme Point, copper-solid bullet features an oversized impact diameter. The larger impact diameter means more impact trauma, better energy transfer and larger wound cavities for faster knockdown. The solid-copper bullet design offers improved weight retention for deeper penetration and a red, reinforced polymer tip. Additional features of this bullet include a streamlined ballistic profile and boattail for flat trajectory, a hollow nose cavity for lethal, terminal performance and a solid-copper construction for maximum retained weight and energy transfer. Mfg: Winchester